Part # : LK-H-TALX-8-K-02
- Honda Talon 1000X : 2019+
For Standing Out and Pushing Limits
Your Honda Talon 1000X is tough, sleek, and aggressive—the perfect rig for riding hard through just about any conditions. But if you’re wanting to take on wilder trails and bigger obstacles, you need to get some more ground clearance under you. This SuperATV 8” Lift Kit was designed specifically for your Honda Talon and is just what you need to stand out and push your machine to its limits. It gives you enough height to clear 44” tires and makes your suspension stronger than ever.
A True 8” Lift
We’re not into fudging numbers or rounding up. This kit gives you a true 8” of lift and room to run up to 44” tires. You’ll be sitting high enough to clear any rock or bump like it’s nothing. If you’re looking for a way to set yourself apart from everyone else at the ride park and inspire a little jealousy along the way, we’ve got you covered.
A Suspension Overhaul
If you’re going to put an extra 8” under your ride, you’ll need something more than stock to hold it up. That’s why this UTV lift kit comes with everything you need to completely overhaul your suspension, including heavy-duty A-arms, trailing arms, and radius arms. You also get a set of Rhino 2.0 Axles. These axles are made with 4340 from end to end and receive our proprietary heat treatment for added strength. With these suspension components on your side, you can ride as hard as you want without worry.
Doesn’t Mess with Your Suspension Travel
Adding height to your side-by-side doesn’t mean you have to give up the ride style you’re used to. This lift kit is designed so that you keep the suspension travel and steering radius that you’re used to. You get the same comfortable ride you’ve always had—you’re just riding a little bit higher.
Everything You Need for an Easy Install
We know you’re eager to put this lift kit to the test, so we include everything you need for a quick and painless install. You get tie rods, extended brake lines, and steering stops, along with all of the necessary hardware. We also provide easy-to-follow instructions. And if all else fails, our unbeatable customer service team is ready and waiting to walk you through it.
|Upper and lower A-arms|
|Left and right trailing arms|
|Upper and lower radius arms|
|(4) Rhino 2.0 Axles (front and rear)|
|(2) Shock brackets|
|(2) Shear brackets|
|(2) Steering stops|
|(4) Spring spacers|
|(16) UHMW bushings and (8) steel sleeves|
|Heavy-duty Z-bend tie rod kit|
|Extended brake lines|
NOTE: Ball joints and limit straps are not included with this lift kit. If you want to use limit straps, you will need to use 22” in the front and 25” in the rear.
- 8” of lift
- Adds 15” of width to your machine (7.5” per side)
- Run up to 44” tires
- Features full camber adjustability
- High-strength spring spacers
- CNC laser cut and brake press bent steel brackets
- Maintains good steering radius and suspension travel
- Easy, bolt-on installation